One-component silicone rubber: JX-706
JX-706 products are transparent, translucent, milky white one-component silicone, this product is good insulation, strong adhesion, with moisture, shock, anti-leakage and excellent resistance to hot and cold shock and so on.
First, the product features:
|
NO |
product name |
JX-704 |
JX-705 |
JX-706 |
|
Before curing |
Exterior |
Translucent semi-flowing |
Full and transparent semi-flowing |
White and semi-flowing |
|
density（cp） |
1.0-1.05 |
1.0-1.05 |
1.0-1.05 |
|
Dry time(25℃.min) |
3-10 |
3-10 |
3-10 |
After curing |
tensile strength(MPa) |
≥ 0.8 |
≥ 0.8 |
≥ 0.8 |
|
Elongation at break(%) |
≥400 |
≥ 400 |
≥ 400 |
|
hardness(A) |
8-25 |
8-25 |
8-25 |
|
The temperature range can be used(℃) |
-60~200 |
-60~200 |
-60~200 |
|
Dielectric strength(KV/mm) |
22 |
22 |
22 |
|
Volume resistance(Ω.cm) |
15
2.0X10 |
15
2.0X10 |
15
2.0X10 |
Second, use:
1, will be bonded or coated surface clean and clean.
2, with a cap to pierce the hose seal, put on the tip of the mouth, the glue will be cleaned to clean the surface, evenly coated, will be bonded surface can be closed.
3, the coated parts placed in the air, placed at room temperature for 24 hours.
4, after the operation, need to be unused glue should immediately tighten the cap, sealed to save. Re-use, if the seal at a little crust, please remove it, does not affect the normal use. |
