Epoxy resin potting glue: JX-506
JX-506 is a transparent epoxy potting resin with low viscosity after mixing and long service time. After curing, it has moisture resistance, electrical and mechanical properties. Suitable for room temperature potting of small electronic parts.
1. Product features and technical parameters:
|
project |
Test parameters or conditions |
JX-506A |
JX-506B |
|
White glue appearance |
Visual inspection |
Colorless transparent liquid |
Colorless transparent liquid |
|
proportion |
25℃ |
1.08 |
0.85-1.05 |
|
Viscosity |
40℃ cps |
1200--1600 |
100--120 |
|
Mixed viscosity |
40℃ cps |
250--350 |
|
Available time |
25℃ |
60—90min (100 g / mass) |
|
Characteristics after curing |
|
Item |
Unit or condition |
JX-505 |
|
Hardness |
Shore--D |
80-90 |
|
Volume resistance |
25℃ |
1.5×10 16 |
|
Surface resistance |
25℃ |
1.2×10 15 |
|
Compressive strength |
MPa |
10-12 |
|
Withstand voltage |
25℃KV/mm |
23 |
2. How to use:
Use ratio: JX-506A glue: JX-506B glue=2:1
Operating conditions: 25℃ X 10H—12H or 60℃ X 2 H
3. Storage and transportation:
Sealed and stored in a cool, dry place at room temperature 25℃, the shelf life is 6 months.
High temperature, sun and rain are strictly prohibited during transportation.
Strict storage requirements, keep away from high temperature and fire sources, and achieve first-in-first-out. The product storage area should be a non-smoking area.
4. matters needing attention
Once the epoxy resin has hardened, it is difficult to remove. Therefore, immediately clean the tools or reactor with a solvent after mixing, such as acetone, xylene or toluene. In order to avoid the hardening of the device can no longer be used.
|
